[Dprglist] Fwd: Need suggestion for expansion boards for STM32 to build a robot

[secretary at dprg.org]

Murray,
      That would be up to Ron, he owns the files.
Regards,
Doug P.

On Thu, Oct 21, 2021 at 6:23 PM Murray Altheim via DPRGlist <
dprglist at lists.dprg.org> wrote:

> On 22/10/21 6:08 am, Doug Paradis via DPRGlist wrote:
> [...] An alternative is a board laid out by club member Ron Grant. Ron's
> board
> > requires some more work on your part, but breaks out all the pins. It is
> > much larger than the UNO sensor shield, but has some nice features. It
> may
> > require having it built at a PCB company.
> Hi Doug,
>
> Has Ron released the files for that board somewhere? Because nowadays it's
> almost trivial to send a board spec off to a fab shop and have them made
> and sent back quickly and cheaply, possibly cheaper than from Adafruit or
> another hobbyist vendor (you may be able to buy them for roughly the cost
> that Adafruit does as an OEM).
>
> Having the board files available would be a boon to the robotics community,
> as even I (!) am now looking at STM32 boards, among them the Nucleo-64s.
>
> Cheers,
>
> Murray
>
> ...........................................................................
> Murray Altheim <murray18 at altheim dot com>                       = =  ===
> http://www.altheim.com/murray/                                     ===
> ===
>                                                                     = =
> ===
>      In the evening
>      The rice leaves in the garden
>      Rustle in the autumn wind
>      That blows through my reed hut.
>             -- Minamoto no Tsunenobu
>
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at lists.dprg.org
> http://lists.dprg.org/listinfo.cgi/dprglist-dprg.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dprg.org/pipermail/dprglist-dprg.org/attachments/20211021/5b78bad2/attachment.html>